炸药冲击波激励气体辐射的数值模拟

建立了炸药冲击波激励气体辐射的物理模型和数学模型。用MMIC - 2D软件对爆炸过程进行了模拟计算。分析了冲击波作用下气体的流动特性 ,并给出了爆炸全场的密度分布及随时间的变化规律     

基于相关算法超声流量计的研究

为解决开采原油的精确在线计量问题,在对超声波相关流量计原理分析的基础上,重点研究了超声波相关流量算法。采用循环相关算法,有效克服了有限长离散数据线性相关算法所出现的计算失效问题,并以DSP芯片为核心,实现了超声波相关流量测量系统的设计,完成了信息不丢失测量以及对困难流体流量的非接触在线计量。实验方案经油田现场测试,计量误差可以控制在2%以内。     

Experimental study on explosion dispersion process of a multi-layer composite charge under different initiation modes

The influence of initiation modes on the explosive dispersion process of the multi-layer composite charge (MCC) was studied. Overpressure sensors and high-speed photography system were used to investigate the energy release process of an MCC with a specific structure. The shock wave pressure and explosive dispersion characteristics of the MCC under different initiation modes were compared. The forming and expanding process of the shock wave of the composite charge under different initiation modes was determined. The separation position of the shock wave and fireball interface was determined. The calculation formulas of the shock radius and overpressure of the composite charge are presented. The radius of the shock wave of the composite charge was significantly affected by the initiation mode. Moreover, the development process of the composite explosive fireball under different initiation modes was analyzed, the variation rules of the composite charge dispersion radius and fireball dispersion velocity with time were obtained under the different initiation modes, the explosion energy release rate of composite charge under simultaneous initiation modes was the highest, and the peak overpressure under the simultaneous initiation mode was 1.61 times that of central single-point initiation.     

地波雷达组网探测高空目标优化布站

针对高空无人机等目标，建立基于高频地波雷达为主的2D雷达探测网，以目标高度估计和协同补盲为约束条件，对2D雷达网的优化布站问题进行理论计算和实例仿真，实验结果证明布站方法的有效性。     

基于改进 Gerstner 波的岛礁近岸波浪实时仿真?

为了实现岛礁附近波浪实时仿真，结合 Gerstner 波和水波动力学知识，提出了一种能够模拟波浪卷曲和折射绕射现象的波浪建模与绘制方法。首先，建立 Gerstner 波参数随水深变化关系，构建模拟波浪卷曲过程的几何模型；然后，定义岛礁地形对波浪传播的阻障和遮挡系数，并据此修正波浪传播的波向和波高，实现折射和绕射现象的仿真；最后，应用着色器缓存技术完成计算的硬件加速，并构建了基于视点的波浪传播多分辨率绘制策略。实验结果表明，该方法对波浪的卷曲和折射绕射现象取得了较好的仿真效果，绘制效率能够满足实时性要求。     

Investigation on energy output structure of explosives near-ground explosion

In order to give the energy output structure of typical explosives near-ground explosion in real ground conditions, the free-field shockwave, ground reflection shockwave and Mach wave overpressure time history of composition B explosive, RDX explosive and aluminized explosive were measured by air pressure sensors and ground pressure sensors. The shape of the free-field shock wave, ground reflection shock wave, and Mach wave and explosion flame were captured by high-speed camera. The experimental results show that, at the same horizontal distance from the initiation point, the peak overpressure of explosive shock wave of composition B explosive, both in the air and on the ground, is less than that of RDX and aluminized explosives. At a distance of 3.0 m from the initiation point, the peak overpressure of aluminized explosives is slightly less than that of RDX explosives. Owing to the exothermic effect of aluminum powder, the pressure drop of aluminized explosives is slower than that of RDX explosives. At 5.0 m from the initiation point, the peak overpressure of aluminized explosives is larger than that of RDX explosives. At the same position from the initiation point, among the three kinds of explosives, the impulse of aluminized explosives is the maximum and the impulse of composition B explosives is the minimum. With the increase of the horizontal distance from the initiation point, the height of Mach triple-points (Mach steam) of the three explosives increases gradually. At the same horizontal distance from the initiation point, there is poorly difference in the height of Mach triple-points between aluminized explosive and RDX explosive, and the height of Mach triple-points of composition B explosive is much smaller than that of other two explosives. The maximum diameter and duration of the fireball formed by aluminized explosives are the largest, followed by composition B explosive, and the maximum diameter and duration of the fireball formed by RDX explosive are the smallest.     

辐射叶加载的短波宽带鞭状天线优化设计

提出一款具有多层辐射叶结构的新型鞭状天线,在10 m鞭状天线体上设置不同的辐射叶层数、半径、长度、分支数、仰角及其分布情况,研究其对天线辐射性能的影响,综合考虑选择一套最合适的辐射叶结构,并为天线进行双加载和宽带匹配网络的算法优化。仿真结果表明,与现有的普通宽带鞭状天线相比,增益和效率得到了普遍提高,在低频段增益最高提高了3 dB,效率最高提高了5%;在高频段增益最高提高了5 dB,效率最高提高了35%,方向图上翘也得到了一定的抑制,为改善现有的宽带鞭状天线提供一种新的结构设计方法。     

B4C／Al复合板中应力波行为分析（Ⅱ）

在已建立的应力波传播模型和研究弹、板间作用力所获结果的基础上，为分析复合板应力的变化，对复合板弹板碰撞承受的应力进行了简化处理，根据应力波传播特性，确定了复合板内能量集中区域，研究了应力波在复合板巾的传播和能耗，并讨论了应力波对陶瓷的作用。通过近似计算，发现烧蚀消耗的弹丸动能较大，在复合板中，Al板的塑性变形吸收了19％的弹丸动能。     

水下近距爆炸作用下弹性钢板处的空化特性研究

弹性钢板在水下近距爆炸作用下,冲击波会使其附近流体形成局部空化,脉动气泡会使流体形成锥形空化。利用平面冲击波理论对局部空化的形成特性进行了研究,理论分析了结构目标尺度的变化对空化区域形成的影响,并通过具体试验对局部空化理论进行了验证,两者符合较好;通过试验和数值仿真方法研究了气泡脉动引起的锥形空化的形成特点,初步分析了锥形空化的形成原因。结果表明,锥形空化对结构具有较大的冲击作用。     

陶瓷内衬组合钢管的应力分析

利用厚壁和薄壁圆筒应力分析理论对陶瓷内衬组合钢管的应力进行了分析,并给出当钢管直径一定的情况下,确定陶瓷最小壁厚的一种方法。